
Hospital Bed Packages
Drive DeVilbiss Healthcare Delta Electric Hospital Bed with Half Rails and Innerspring Mattress
This interchangeable and semi-electric bed is the plus model from Drive Medical. Its new universal style head and foot boards are interchangeable, featuring high impact composite end panels. The foot section weighs 50 percent less than conventional foot sections, making your deliveries safer. Bed assembly requires only five components. Even motor assembly can be either installed or removed tool free with the patient still in the bed. The unique single motor and junction box are self-contained to reduce noise and prevent disruptions or distractions. Even in the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times, no crank necessary. A new-and-improved hand pendant includes large, easy-to-use controls. The bed features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Foot section weighs 50 percent less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed New and improved hand pendant has large, easy-to-use controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 155 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 22.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15038MO Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,350.00 CAD$1,299.99 CAD
Drive DeVilbiss Healthcare Delta Full Electric Hospital Bed with Half Rails and Therapeutic Support Mattress
Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Foot section weighs 50 percent less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed|New and improved hand pendant has large, easy-to-use controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 162 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 19.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15037MN (Head and Foot) 15033MHLN-MGBA (Hi/Low) Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,499.99 CAD
Drive DeVilbiss Healthcare Delta Semi Electric Hospital Bed with Full Rails and Therapeutic Support Mattress
This interchangeable and easily assembled semi-electric bed is the plus model from Drive Medical. Its new universal style head and foot boards are interchangeable, featuring high impact composite end panels. Bed assembly requires only five components. Even motor assembly can be either installed or removed tool free with the patient still in the bed. The unique single motor and junction box are self-contained to reduce noise and prevent disruptions or distractions. Even in the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times, no crank necessary. A new-and-improved hand pendant includes large controls. The bed features channel frame construction with zinc coated spring deck to provide strength and reduced weight. Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed New and improved hand pendant has large controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 155 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 22.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15038MO Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,499.99 CAD$1,299.99 CAD
Drive DeVilbiss Healthcare Delta Full Electric Hospital Bed with Half Rails and Innerspring Mattress
Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Foot section weighs 50 percent less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed New and improved hand pendant has large, easy-to-use controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 162 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 19.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15037MN (Head and Foot) 15033MHLN-MGBA (Hi/Low) Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,499.99 CAD
Drive Devilbiss Healthcare Delta Full Electric Hospital Bed with Full Rails and Innerspring Mattress
This lightweight, interchangeable and easily assembled electric bed (with full side rails and mattress) is the ultra-light plus model from Drive Medical. Its new universal style, crack proof head and foot boards are interchangeable, featuring high impact composite end panels. A height adjustment motor arrives pre-installed on the foot section but can still be either installed or removed tool free in seconds with the patient still in the bed. Information The unique single motor and junction box are self-contained to reduce noise and prevent disruptions or distractions. Even in the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times. A new-and-improved hand pendant includes large, easy-to-use controls, and this bed kid includes full side rails for additional safety and a comfortable inner spring mattress. The bed features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Foot section weighs 50 percent less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed New and improved hand pendant has large, easy-to-use controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 162 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 19.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15037MN (Head and Foot) 15033MHLN-MGBA (Hi/Low) Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,650.00 CAD$1,499.99 CAD
Drive Devilbiss Healthcare Delta Full Electric Low Hospital Bed with Full Rails and Innerspring Mattress
A pre-installed motor on this ultra light electric bed from Drive Medical allows you to adjust from standard to low height, suiting your ever-changing needs. A motor near the foot section of the bed lets either the patient or caregiver choose the proper height for them. And the motor can be assembled or disassembled tool free, even while the patient is in the bed. The bed is strong enough to withstand a weight capacity of up to 450 pounds yet features a caster that moves easily, making adjustments between 9.5"-20" deck height a cinch. In the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times. A new-and-improved hand pendant includes large and easy-to-use controls. In addition to these various features, you can expect a durable and impact-resistant product that is easy to set up out of the box. The bed and features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. The end panels are washable, making upkeep of this bed quick and easy. Features The motor assembly can be installed and removed with patient in bed Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise Easy to set up Top mounted Hi/Lo crank accessibility Height-adjustable motor comes pre-installed on the foot section Caster easily moves from standard to low bed position Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines The motor is UL approved In the event of a power failure, a 9V battery, located in the hand control, can lower the head and foot sections nine times New and improved hand pendant has large, easy-to-use controls Hand crank located on the top of the footboard prevents bending for the caregiver when in the low position Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 167 lbs Batteries: 1 - 9V Bed Height (Max): 20.5" Bed Height (Min): 9" Bed Height w/ Casters (Max): 23.5" Bed Height w/ Casters (Min): 12" Casters: 3" Foot Section Height (Max): 31.5" Foot Section Height (Min): 20" Foot Section Height w/ Casters (Max): 34.5" Foot Section Height w/ Casters (Min): 23" Footboard Height (Max): 32.5" Footboard Height (Min): 21.5" Footboard Height w/ Casters (Max): 35.5" Footboard Height w/ Casters (Min): 24.5" Ground Clearance: 0.5"-12" Ground Clearance w/ Casters: 3.5"-15" Head Section Height (Max): 44.75" Head Section Height (Min): 33.25" Head Section Height w/ Casters (Max): 47.75" Head Section Height w/ Casters (Min): 36.25" Headboard Height (Max): 35" Headboard Height (Min): 24" Headboard Height w/ Casters (Max): 38" Headboard Height w/ Casters (Min): 27" Motor: 15037MN (Head and Foot) 15033MHLN-MGBA (Hi/Low) Overall Product Height: 24" Overall Product Length: 88.625" Overall Product Width: 34.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,599.99 CAD
Drive Devilbiss Healthcare Delta Semi Electric Hospital Bed with Full Rails and Innerspring Mattress
This lightweight, interchangeable and easily assembled semi-electric bed (with full side rails and mattress) is the ultra-light plus model from Drive Medical. Its new universal style head and foot boards are interchangeable, featuring high impact composite end panels. Information The foot section weighs 50 percent less than conventional foot sections, making your deliveries safer and easier. Bed assembly requires only five components. Even motor assembly can be either installed or removed tool free with the patient still in the bed. The unique single motor and junction box are self-contained to reduce noise and prevent disruptions or distractions. Even in the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times, no crank necessary. A new-and-improved hand pendant includes large, easy-to-use controls, and this bed kid includes full side rails for additional safety and a comfortable inner spring mattress. The bed features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Foot section weighs 50 percent less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed New and improved hand pendant has large, easy-to-use controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 155 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 22.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15038MO Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,299.99 CAD
Drive DeVilbiss Healthcare Delta Semi Electric Hospital Bed with Full Rails and Foam Mattress
This lightweight, interchangeable and easily assembled semi-electric bed is the ultra-light plus model from Drive Medical. Its new universal style head and foot boards are interchangeable, featuring high impact composite end panels. The foot section weighs 50 percent less than conventional foot sections, making your deliveries safer and easier. Bed assembly requires only five components. Even motor assembly can be either installed or removed tool free with the patient still in the bed. The unique single motor and junction box are self-contained to reduce noise and prevent disruptions or distractions. Even in the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times, no crank necessary. A new-and-improved hand pendant includes large, easy-to-use controls. The bed features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Foot section weighs 50 percent less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed New and improved hand pendant has large, easy-to-use controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 155 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 22.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15038MO Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,299.99 CAD
Drive DeVilbiss Healthcare Full Electric Low Height hospital Bed with mattress by Drive
The Drive Medical Full Electric low height bed package comes with your choice of 80" innerspring or therapeutic support mattress. It also comes with your selection of half rails or full rails. Low Deck height with flexibility to configure "roll at any height" or "roll at low height only" castor location -Roll at any Height: 14.81" (376mm) to 22.83" (580 mm) deck height -Roll at Low Height: 11.81 (300 mm) to 19.83" (504mm) deck height Quiet, convenient, full electric operation provides smooth position change w/easy-to-use Hand Pendant control of Head/Foot Section positioning and overall height of the bed frame for maximum comfort and versatility for the patient or caregiver Height-adjustment and Head/Foot deck motors come pre-installed on the foot section no assembly required In the event of power failure, top mounted Hi/Lo crank accessibility and manual crank motor override of sleep surface adjustments Easy-to-transport and set up, Bed ships in two cartons Channel frame construction provides superior strength and reduced weight Reinforced frame resists twisting and bending Long lasting Zinc-coated spring deck for Patient comfort Heavy-duty bed ends with durable HD Polyethylene Molded Bed End covers are attractive, easy-to-maintain Headboard is taller than footboard to blend with home décor Labels and color-coded springs help ensure accurate installation of side rails for patient safety High performance workhorse muscle of the 3-motor power plant is an industry standard Half rails and full rails available in packages (PKG) or sold separately Satisfies applicable FDA entrapment guidelines Extension kit available (model #15005EXTKIT-L) extends length from 80" to 84" Specs Carton Shipping Weight 184 lbs Roll at Low Height 11.81” (300mm) to 19.83” (504mm) deck height Roll at any Height 14.81" (376mm) to 22.83” (580mm) deck height Unit Dimensions 36" (.914m) (W) x 88" (2.24m) (L) | Overall Sleep Surface 36" W x 80" L Warranty Original Purchaser. Limited Lifetime on welds, 5 year on frame, motor, pendant, 1 year on all other parts and components. During the warranty period, defective items will be repaired or replaced at Drive's option at no charge Weight 169 lbs
$1,399.99 CAD - $1,549.99 CAD
Drive DeVilbiss Healthcare Solite Pro Homecare Bed
Free Shipping throughout Canada The Solite Pro from Drive DeVilbiss Healthcare is a fully electrical profiled homecare bed that offers smooth, quiet operation and versatile positioning for maximum patient comfort. The Solite Pro can nest within itself and comes standard with a built-in transport stand for storage and easy transport. Additional features include a tool-free built-in leg extension extending from 80" to 84", knee break function, and improved actuators in the variable height mechanism that add to the strength of the bed, all while retaining an attractive, domestic look and feel. Redesigned platform for improved patient comfort when profiling Individual sections strengthened for extended performance and reliability Improved integral leg extension with safety features to prevent entrapment Improved auto-regressing backrest prevents pinching in the sacral area All individual sections of the bed weigh less than 55 lbs. (25 kg) for easier assembly Four braked castors for maneuverability and safety Easy-use handset controls all functions and includes lockout function Transport stand included Optional integral full-length side rails for safety and ease of use (item #: 15006LEXRAIL) Additional optional accessories sold separately include grab handles in two height options, standard (item #: 15006LPSTDRAIL) and short (item #: 15006LSHRTRAIL) Rail accessories meet FDA and ASTM entrapment guidelines and standards Specifications Product Width 37.9" (without side rails); 39.9" (with side rails) Bed Height Range 15.5" (mattress platform height) to 32" (mattress platform height) Casters 3.93" DIA Castors with directional and movement brake (bed must always be used with casters) Ground Clearance 3.9" Motor Linak LA27 Actuators × 4 per bed Stroke lengths – HI/LOW: 16.5" stroke, 23.6" install length Head Section: 7.87" stroke, 14.5" install length Foot Section: 2.5" stroke, 10.6" install length Product Length 87.7" Product Weight 182.1 lbs. (on transport stand) Product Height 15.5"-32.0" (mattress platform height) Bed Height Minimum With Casters 11.6" Bed Height Maximum With Casters 28.2" Mattresses The following mattresses are sold separately and are compatible with the Solite Pro Homecare Bed:
$1,999.99 CAD
Drive Devilbiss Healthcare Full-Electric hospital Bed with full rails Therapeutic Mattress
This product includes Therapeutic support mattress SKU 15019 and full rails This product also includes hospital bed fitted sheets SKU 15030HBL The Delta 1000 is truly universal because the bed frame can be used with Drive's and most other manufacturers’ bed ends, old and new The transition box mounted on the foot section is key to interchangeability (Figure A) The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor (Figure B) The wood grain panels are break and scratch resistant Foot section weighs 50% less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations (Figure C) Labels and color-coded springs assure accurate installation of side rails for patient safety (Figure D) Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails and mattress safety-tested by SGS, a nationally recognized testing facility Satisfies all applicable FDA entrapment guidelines The motor is UL approved In the event of a power failure, a 9 volt battery, located in the hand control, can lower the head and foot sections nine times No crank needed New and improved hand pendant has large, easy-to-use controls (Figure E) Bed ships in two cartons Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Extension kit available (model #15030EXTKIT) extends length from 80" to 84" Patent Pending Weight Capacity 450 lbs Specs Bed Height Maximum With Casters 21.5" Bed Height Minimum Without Casters 12.5" Carton Shipping Weight 182 lbs. Unit Dimensions 36" (W) x 88" (L) | Overall Sleep Surface 36" W x 80" L Warranty (Original Purchaser) 5 Years on Motor and Hand Control, Limited Lifetime on Welds and Frame, 1 Year on All Other Parts and Components Weight 169 lbs. Weight Capacity 450 lbs Bed Height Max wo caster 18.5" Bed Height Min w casters 15.5"
$1,499.99 CAD
Drive Devilbiss Healthcare Delta Semi-Electric Bed with Mattress
This interchangeable semi-electric bed is the plus model from Drive Medical. Its new universal style head and foot boards are interchangeable, featuring high impact composite end panels. The foot section weighs 50 percent less than conventional foot sections, making your deliveries easier. Bed assembly requires only five components. Even motor assembly can be either installed or removed tool free with the patient still in the bed. The unique single motor and junction box are self-contained to reduce noise and prevent disruptions or distractions. Even in the event of a power failure, a 9-volt battery, located in the motor, can lower the head and foot sections up to nine times, no crank necessary. A new-and-improved hand pendant includes large, easy-to-use controls. The bed features channel frame construction with zinc coated spring deck to provide superior strength and reduced weight. Features The motor is UL approved Bed frame can be used with Drive's and most other manufacturers' bed ends, old and new The transition box mounted on the foot section is key to interchangeability The transition box allows you to change the rotation of the high/low shaft Headboard is taller than footboard to better fit home decor The wood grain panels are break and scratch resistant Foot section weighs 50 percent less than conventional foot sections to make deliveries safe and easy Once installed, the high/low shaft will stay with the bed to eliminate loss or forgetting on future installations Labels and color-coded springs assure accurate installation of side rails for patient safety|Unique motor is completely self-contained to reduce weight and noise The motor assembly can be installed and removed with patient in bed Bed, side rails, and mattress safety-tested by SGS, a nationally recognized testing facility; Satisfies all applicable FDA entrapment guidelines In the event of a power failure, a 9 volt battery located in the motor can lower the head and foot sections nine times No crank needed New and improved hand pendant has large, easy-to-use controls Channel frame construction provides superior strength and reduced weight Zinc-coated spring deck Weight Capacity 450 lbs Specs Actual Product Weight: 155 lbs Batteries: 1 - 9V Bed Height (Max): 19.5" Bed Height (Min): 12" Bed Height w/ Casters (Max): 22.5" Bed Height w/ Casters (Min): 15" Casters: 3" Foot Section Height (Max): 30.25" Foot Section Height (Min): 22.75" Foot Section Height w/ Casters (Max): 33.25" Foot Section Height w/ Casters (Min): 25.75" Footboard Height (Max): 30.25" Footboard Height (Min): 22.75" Footboard Height w/ Casters (Max): 33.25" Footboard Height w/ Casters (Min): 25.75" Ground Clearance: 4"-10.5" Ground Clearance w/ Casters: 7"-14.5" Head Section Height (Max): 44.5" Head Section Height (Min): 37" Head Section Height w/ Casters (Max): 47.5" Head Section Height w/ Casters (Min): 40" Headboard Height (Max): 32.75" Headboard Height (Min): 25.25" Headboard Height w/ Casters (Max): 35.75" Headboard Height w/ Casters (Min): 28.25" Motor: 15038MO Overall Product Height: 35.75" Overall Product Length: 88.5" Overall Product Width: 35.75" Primary Product Color: Brown Primary Product Material: Steel Product Weight Capacity: 450 lbs.
$1,499.99 CAD$1,299.99 CAD
You have seen 12 out of 13 products
